The formulation solution

Formulate for speed: Improve your productivity!

What is productivity for you? Higher-line speed? Faster curing? Faster return to service? Faster batch processing? Whatever it is, we have the raw materials and formulations to increase the drying speed of your coatings!

Productivity is commonly defined as the ratio between output and input. 

In industrial and floor coatings more productivity means faster production or faster application and cure.

Even though a target for many, this topic has been a concern for coating producers and applicators. As the backlog of maintenance jobs is increasing, the demand for paint contractors and labour shortages are constraining their ability to satisfy that demand.

Let’s look into the facts of productivity:

In 2020, infrastructure spending amounted to 3.9 trillion USD1. It is estimated to grow by 17 folds up until 2035 to reach a record high of 69.5 trillion USD. The increased infrastructure spending will further drive the demand for coatings2.

Typical ways of increasing productivity

Production Process

Faster batch processing time by using:

● Easier to disperse pigments
● Liquid pigment pastes

● Pre-dispersed fumed silica
● Liquid Thixotropes

Application Process

Reduce layers per application process by:

● Applying thicker films using formulations with much higher solids content
Curing Process

Faster drying speed of each layer by using:

● Faster physical drying binders
● Faster crosslinking curing agents
● Catalysts in higher dosage 
● Forced curing 

Several raw materials serve to increase productivity

Discover what technologies to use and what tests we run at our laboratories to create fast formulations

Rub out test results

Enable third party cookies to play this video

Below you can enable third party cookies. Your choice will be saved and the page will not refresh.



Stir-in pigment preparation

Switching from standard pigments to Stir-in Pigment Preparations to have easier incorporation and shorter and less intensive dispersion process with a high degree of flexibility and without undesired formulation raw materials.

Learn more
Pre-dispersed fumed silica

Switching from powder Fumed Silica to pre-dispersed Fumed Silica for much easier handling and without the need to pre-disperse the silica beforehand and thus to save time and energy in production.

Silane modified polymers

Switch from alkyd resins or acrylic emulsions to solvent-free silane modified polymers to achieve faster curing and better mechanical, chemical and corrosion resistance in 1K air drying industrial coatings.

Special epoxy curing agents

Using special epoxy curing agents for fast curing and at the same time better chemical resistance for industrial and floor coatings.

Polyaspartics resins

Switching from 2K polyurethane topcoats to fast curing polyaspartics with very high solids content to reduce the number of coats needed while maintaining corrosion resistance, reducing VOC and increasing drying speed.

Learn more

Moving from an amine-based curing agent to epoxy-siloxane helps reducing the number of coats needed while maintaining high corrosion resistance and outstanding weathering stability.


           Formulations made simple


Changing your formulation might mean encountering some roadblocks on the way. Take the time to learn how to crack the code of your coatings formulation and get your questions answered during a live webinar. 

How to speed-up the drying & curing time of coatings

Silane modified polymers for metal coatings with good corrosion and UV resistance

Unlock these benefits

faster curing icon
Faster curing 

Increase the curing speed to achieve faster return to service, outdoor or stack storage without damage.

reduced curing temperature icon
Curing temperature reduction

Use the right technology and increase the curing speed by reducing the energy required.

Faster batch processing icon
Faster batch processing

Incorporate easier and reduce post batch adjustment to achieve output increase and energy saving.

loyer reduction icon
Layer reduction

Reduce the number of layers necessary to achieve the right performance. Save time and money in your coating application.

Product Offering

Stir-in pigment preparation

Borchi Oxy-Coat & Borchi Dragon

High-performance catalysts like Borchi® Oxy-Coat and Borchi Dragon provide improved adhesion in DTM high-performance alkyd coatings compared to cobalt and other metal carboxylate driers. Improved adhesion is a result of better crosslinking of the coating at the substrate, which provides enhanced wet adhesion performance. The use of high-performance catalysts improved dry times, non-yellowing, formulation complexity reduction, and the prevention of wrinkling in thick film builds.
Polyaspartics resins

Desmophen NH 1420

Desmophen® NH 1420 is an aminofunctional co-reactant for polyisocyanates for the formulation of high-solids, two-component topcoats, and solvent-free coating materials. As part of the Pasquick® technology it addresses the industry needs for improved productivity benefits such as fast cure at ambient temperature which provides a faster painting process in industrial applications and a quick return to service for on-site applications. Proven in several application areas ranging from industrial floor coatings, corrosion protection, wind energy and industrial coatings to car refinish, it is ideal for both interior and exterior applications.

1Global Infrastructure Hub


3 McKinsey
4 Accenture